Sapa Facade 4150PH
Passive House certified curtain walling
Sapa Facade 4150 PH meets the stringent Passive House energy requirements covered by the German certification institute ift Rosenheim. The system achieves low U cw = 0,66 W/m2 K.
Elevations & Details
Cross section
Click on the detail to see dimensions and profile numbers
Cross section
Click on the detail to see dimensions and profile numbers
Drawing texts
The texts are intended to help the specifiers to define which systems, fittings, glazing units, surface treatment alternatives and functions are required. The licensed fabricators will later use them during the production of the finished products.
Download the text as .dwg
Download the text as .pdf
Dodając ten tekst w swoich dokumentach przetargowych pomagasz zaprojektować budynki przyszłości.
Rozwiązanie systemowe wykorzystuje materiał pochodzący z recyclingu w następujących obszarach:
- Aluminium uzyskane w co najmniej 75% z recyklingu (EoL) e.g. AW 6060T66
For aluminium with EoL recovery, material that has already been installed in and removed from a building, is recycled again. The minimum 75 percent proportion of this post-consumer material (>75% EoL material) must be verified by means of an independent certification.
Glazing
Unprotected glazed surfaces that can be reached by persons shall be designed to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.
Glass thickness 33-56 mm
The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.
Opening units
The window frames are specially adapted to the glass rebate of the facade system for simple installation. The windows in the 1086 SX window system are available as tilt and turn, bottom- hung, top-hung and side-hung, inward opening units.
The 2086 door system includes inward and outward opening single or double leaf doors with frame profiles that are specially adapted to the glass rebate of the facade system for simple installation.
1086 SX Windows
 |
|
2086 SX doors
 |
|
||||||||
Facade additions
Opinions differ among designers on how the outside joints of a glass facade should be shaped. We have two different decorative profile systems: Add and Expressive.
Add, offers a design concept with its visible fastening elements and characteristic groove. The add cap is also able to support solar shading elements, lightning conductors, down pipes, rain gutters, signboards and lighting.
Expressive, gives the designer more freedom in the play of light and shadow on the facade. It is also possible to design one's own decorative profiles if needed.
Add, decorative profiles
 |
 |
 | ||
| Add 42693 basic decorative cap with mitred connection. | Add 42693 basic decorative cap complemented with coloured infill cap. | Add 42693 basic decorative cap with large screw mounting. | ||
Add, support system
 |
 |
 | ||
| Add 42693 basic decorative cap with lightning conductor cable | Add basdekorprofil 42693 med åskledarkabel | Add 42693 basic decorative cape with connection for solar shading elements | ||
Expressive, decorative profiles
 |
 |
 | ||
| Expressive 42695 flanged cap in horizontal arrangement combined with 42227cap in vertical arrangement | Expressive 68827 decorative cap in horizontal arrangement combined with 68823 wing cap in vertical arrangement | Expressive 42695 flanged cap in horizontal and vertical arrangement | ||
 |
 |
 | ||
| Expressive 68819 T-cap in horizontal and vertical arrangement | Expressive 68827 U-cap in horizontal and vertical arrangement | Expressive 42813 pyramid cap in horizontal arrangement combined with 42811 cape in vertical arrangement | ||
Product overview
Sapa Facade 4150 PH meets the stringent Passive House energy requirements covered by the German certification institute ift Rosenheim. The system achieves low U cw = 0,66 W/m2 K.