Fasady
The 4150 facade system consists of 50 mm wide insulated aluminium profiles. The design of the inside gasket and the thermal break optimises the insulation of the profiles.
The profiles are available in a number of different depths. They are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The system can be easily complemented with opening units. The U value of a facade must be calculated for the entire facade.
The 4150 SX facade system consists of 50 mm wide insulated aluminium profiles. Our newly developed insulating thermal break together with the inside gasket, provides good insulation capacity (so-called High Insulated).
The mullions are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The system can be easily complemented with opening units. The U value of a facade must be calculated for the entire facade.
Sapa Facade 4150 PH meets the stringent Passive House energy requirements covered by the German certification institute ift Rosenheim. The system achieves low U cw = 0,66 W/m2 K.
Sapa Facade 4150 EF enables easier control over the production process and rational installation without scaffolding. The wall is finished directly when installed.
The system consists of 70 mm visible profiles at element joints or 50 mm at intermediate cross-bars. The design of the inside gasket and the thermal break optimises the insulation of the profiles.
Glass thicknes between 27-56 mm can be used. The profiles are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The system can be easily complemented with opening units.
Please contact our Architect support for more information.
The 4150 SSG Structural Glazing facade system consists of 50 mm wide insulated aluminium mullions and transoms. The system is based on double glazing units with a warm edge and a specially developed mounting profile for installation fittings. The glass panes are anchored in the mullions and transoms with the help of installation fittings. The weather seal between the glass panes is done with the use of an approved sealing compound, usually black. The design of the inside gasket and the insulating strip optimises the insulation of the profiles.
The mullions are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints. The system also includes opening units, which can be easily integrated. The U value of a facade must be calculated for the entire facade.
The 5050 SG System Glazing facade system consists of 50 mm wide insulated aluminium profiles. The external glass holders are only 32 mm wide, while the internal framework profiles are 50 mm wide. The external glass holders are best installed with countersunk screws, which can be hidden with covers. Rebate for double and tripple glazing units with standard sealing.
The profiles are designed so as to ensure stability under the dimensioning loads. The system can be easily complemented with opening units. The U value of a facade must be reported for the entire facade.