Sliding Door 2115 Performance
- Versions. Two or four sliding leaves in two-track frame alt. three sliding leaves in three-track frame.
- Door leaf dimensions. Max height 2,4 m. Max width 1,4 m.
- Door leaf weight. Max 160 kg
- Fitting. Inside or in- and outside.
Elevations & Details
Save this elevation as:
dwg /
dxf
Click on number to view the details
Cross section
Click on the detail to see dimensions and profile numbers
Save this elevation as:
dwg /
dxf
Click on number to view the details
Cross section
Click on the detail to see dimensions and profile numbers
Save this elevation as:
dwg /
dxf
Click on number to view the details
Cross section
Click on the detail to see dimensions and profile numbers
Drawing texts
The texts are intended to help the specificators to specify which systems, fittings, glazing units, surface treatment alternatives and functions are required. They are later used by the licensed fabricators during the production of the finished products.
Download the text as .dwg
Download the text as .pdf
Clear dimension
The sliding door allows for big openings in conservatories etc.
Two-track with two sliding leaves
|
| |
F.O. = Clear dimension
K.Y.M = Frame outside dimension
Clear dimension = KYM/ 2 - 184 mm
KYM =Clear dimension x 2 + 368
|
Two-track with four sliding leaves
|
| |
F.O. = Clear dimension
K.Y.M = Frame outside dimension
Clear dimension = KYM/ 2 - 325 mm
KYM =Clear dimension x 2 + 650
|
Three-track with three sliding leaves
 |
| |
F.O. = Clear dimension
K.Y.M = Frame outside dimension
Clear dimension = KYM x 2/3 - 299
KYM = Clear dimension x 1,5 + 448
|
Fitting functions
Sapa skjutdörr 2115 kan utföras med tvåspårig karm och två eller fyra skjutbara dörrblad alternativt med trespårig karm och tre skjutbara dörrblad. Dörrbladen har spanjolett med tre låspunkter. Handtag av aluminium. Skjutdörren löper tyst med rostfria hjul på rostfri räls.
|
Två skjutbara dörrblad i två spår
|
|
Fyra skjutbara dörrblad i två spår
|
|
Tre skjutbara dörrblad i tre spår
 |
Location in the wall
For the entire structure to meet the energy saving requirements and ensure good comfort it is necessary to install the sliding terrace door in the warm part of the wall. This means that it should be installed as deep into the wall as possible, which has a number of advantages.
It creates good conditions for appropriate fixing and a well functioning joint. The risk of condensation is reduced due to a higher surface temperature. The joint between the frame profile and the wall shall be made with two step sealing. This means that it should consist of an outer rain barrier with an underlying air channel, a mineral wool insulation layer and an inner diffusion sealing joint.
Dimensions
Frame outside dimensions for sliding door(.pdf)
For more information please contact our Architect Support.
Glazing
Unprotected glazed surfaces which are so located that they can be reached by persons shall be designed so as to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.
Glass thickness 24-25 mm
The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.
Glass thickness 26-28 mm
The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.
U values for lift-sliding door
Formula for calculating the total U value of a sliding door, taking into account the glazing unit, the share of profiles and an edge zone effect linear factor.
Usliding door = ( Ag * Ug + Af * Uf + Ig * ψg ) / ( Ag + Af )
The calculations are based on the requirements and general guidelines.
| Lift-sliding doori |
U value of glass Ug W/m2K (middle point)
Warm edge distance strip
|
| width x height mm |
1,1 |
| 2000 x 2300 |
1,9 |
| 2500 x 2300 |
1,8 |
Fixing principles
Lift-sliding doors must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the door.
Example:
 |
 |
| Fixing of frame with twist anchor inwards |
Fixing of frame with twist anchor outwards |
Product overview
Sapa 2115 is a simpler and lighter sliding door. It's suitable for patios and conservatories where the demands are not as high as in sections of outer walls. The sliding door is made of insulated aluminum profiles with a frame depth 78.7 mm (Single wing sliding doors) and 141.8< mm (single-wing telescopic). Leaf depth 32.8 mm alt. 36.8 mm. The insulation is 30 mm wide glass fiber reinforced polyamide strips. The door leaf runs quietly with stainless steel wheels on stainless steel rails.
