The 3050 glazed elements system consists of 50 mm deep uninsulated aluminium profiles. Glazing is done from the inside with the use of glazing beads.
The profiles are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints.
The texts are intended to help the specifiers to define which systems, fittings, glazing units, surface treatment alternatives and functions are required. The licensed fabricators later use them during the production of the finished products.
Download the text as .dwg
Download the text as .pdf
Certain parts of the elements can or must be filled with infill panels. It is important to consider the backing and the surface layer of the panels. If the infill panels are exposed to heavy impacts or mechanical loads, the backing should be made of durable board and the surface layer should be made of stainless or glass enamelled steel sheet.
| 1,5 mm Aluminium sheet 3,2 mm Board 25 mm Insulation 3,2 mm Board 1,5 mm Aluminium sheet |
| 1,5 mm Aluminium sheet 12 mm Chipboard 20 mm Insulation 1,5 mm Aluminium sheet |
| 1,5 mm Aluminium sheet 20 mm Insulation 10 mm Sapa boarding |
Glazed elements must be fixed to a stable and suitable wall structure. The choice of fixing method depends on the wall type. The number and location of fixing points depends on the size of the element.
 |
 |
 | ||
| Fixing of frame with twist anchor |
Fixing of frame with adjustable frame bushing |
Fixing of frame with bolt and welded plate |
Unprotected glazed surfaces, which are located so that persons can reach them and shall be designed to limit the risk of injury. Such glazed surfaces shall be dimensioned so as to withstand the dynamic influence of a person. Applicable standards and requirements should be taken into account.
Glass thickness 3-33 mm
The illustration shows the different functional dimensions commonly used by the window industry and established by the MTK. The gaskets are made of EPDM rubber and are available in several versions.
Glass thickness 3-33 mm
Glass thickness 5-10 mm
The 3050 glazed elements system consists of 50 mm deep uninsulated aluminium profiles. Glazing is done from the inside with the use of glazing beads.
The profiles are designed so as to ensure stability under the dimensioning loads and are joined together with hidden joints.
